| Model | PR-FB30CP |
| Type | Reflective (Background suppression) |
| Output | PNP |
| Shape | Flat |
| Cable connection | M8 connector (4 pin) |
| Detection distance | 1 to 30 mm 0.039" to 1.181" |
| Number of control outputs | 2 |
| Output operation | Output 1 | Light-ON |
| Output 2 | Dark-ON |
| Response time | Output 1 | 0.5 ms |
| Output 2 | ON→OFF: 2.7 ms, OFF→ON: 0.5 ms |
| Sensitivity adjustment | None |
| Spot diameter | Approx. ø5 mm (at 30 mm) |
| Light source | 4 element, point light source, red LED (650 nm) |
| Mutual interference prevention function | 4 sensors |
| Indicator lamp | Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green) |
| Control output | 30 VDC or lower, 50 mA or lower
Leakage current:
When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower
Residual voltage:
When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower. |
| Protection circuit | Power supply reverse connection protection, output overcurrent protection,
output surge protection, power supply surge protection |
| Rating | Power voltage | 10 to 30 VDC, including Ripple (P-P) 10 % |
| Current consumption | 19 mA |
| Environmental resistance | Enclosure rating | IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250) |
| Insulation resistance | 20 MΩ or higher (500 VDC) |
| Ambient light | Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower |
| Ambient temperature | -25 to +55 °C -13 to 131 °F (No freezing) |
| Storage temperature | -25 to +75 °C -13 to 167 °F |
| Relative humidity | 35 to 85 % RH (No condensation) |
| Withstand voltage | 1,000 VAC, 50/60 Hz, 1 min |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions |
| Shock resistance | 1,000 m/s2, 6 times in each of the X, Y, and Z directions |
| Material | Case: SUS316L, indicator cover/lens cover: polysulfone,
cord protector: polymethylpentene, filler: polyester-based resin |
| Accessories | Instruction Manual |
| Weight | Approx. 10 g |
